HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
gene22

2001 RM 250 Jetting Question

1 post in this topic

Hello,

I have a 2001 RM 250 and am trying to correctly jet the carb. I set the idle screw to provide a slightly fast idle and then turned the air screw to find the best position. Using the stock pilot (48, stock) it took > 2.5 turns. I dropped the pilot to 45 and i do not see much of an increase in ide speed from 1 1/2 turns to 2.5 turns, but when I go to 4 turns it significantly increases in rpm. Is this normal? I was expecting to have to increase the pilot above the stock 48, considering that the temperature is cold (~40F). If anyone has any adive I would appreciate it. I am trying to get the bike set-up for the colder weather.

Gene

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0