High bend bars

Im looking to get some taller bars as I feel I will go over the bars one day ! seeing Im from the UK I can't seem to find "CR high bend" I would like to go for Renthals but not sure what to go for.

I have seen these on ebay but whats the best ?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8044154362&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT&refitem=280161771703&itemcount=4&refwidgetloc=active_view_item&usedrule1=StoreCatToStoreCat&refwidgettype=cross_promot_widget

CR/CRF bars

or

http://cgi.ebay.co.uk/Renthal-enduro-pro-high-bend-Handlebars-Silver_W0QQitemZ280161771703QQihZ018QQcategoryZ122304QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

enduro pro high bend

I use Tusk CR Hi Bend on my '99 XL650R, Rocky Mountain sells them. They're fairly inexpensive also :worthy:

I have been looking into risers.. They just raise the stock bar mounting point 1" or up to 2" depending on where you get them. They come in 7/8 to 7/8 or 7/8 to 1 1/8 etc...

Rox has a pivoting version that raises the stock bar mounting point 2 " and will also pivot them forward or backward.

Just something to consider.

Just ordered a set of Rox risers, myself. Should be here sometime this week. I couldn't really find much at fault with the stockers other than being too low, hence didn't feel like changing over all the controls to another set of bars (besides, I just installed grip heaters a couple months ago).

:worthy:

IMO the CR highs aren't very high at all.

(The RC highs are though - I keep thinking people get the two confused, but maybe not.)

Go check out Renthals web site. They have all the witdth, heigth & sweep info laid out on a nifty spreadsheet for all the different bars they make.

Go to Answers site as well - same thing & will give you some idea what's out there. & then you'll be able to compare to what you've got now (sweep & width).

Of the two you have listed, the enduro's are definately the tallest, but the have a wacky sweep as I recall - cool if you sit alot, weird if you stand alot IMO. But like anything, you can adapt real easy in a few rides.

Im looking to get some taller bars as I feel I will go over the bars one day ! seeing Im from the UK I can't seem to find "CR high bend" I would like to go for Renthals but not sure what to go for.

I have seen these on ebay but whats the best ?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8044154362&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT&refitem=280161771703&itemcount=4&refwidgetloc=active_view_item&usedrule1=StoreCatToStoreCat&refwidgettype=cross_promot_widget

CR/CRF bars

or

http://cgi.ebay.co.uk/Renthal-enduro-pro-high-bend-Handlebars-Silver_W0QQitemZ280161771703QQihZ018QQcategoryZ122304QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

enduro pro high bend

I have been running the Pastrana High bars and love them. I thought they might be too high, but I find them perfect for my height of 6"3". The minimum sweep of the bars adds to the comfort with my longer arms. Check out my garage to see a photo of the bars mounted. :worthy:

Plus 1 on the Pastrana FMX's. Love them and the minimal sweep. Keeps the ole wrists straightened up.

you have to be able to order off some websites in UK cant you? Or is it just too expensive to ship overseas?

Heard alot about the Pastrana bend, i use CR high and im 6'2" and love em.

+1 on the Rox Risers. Just installed them a couple of weeks ago. They are an awesome, well made product with tons of adjustability. Check them out you wont be disapointed.

+1 on the Rox Risers. Just installed them a couple of weeks ago. They are an awesome, well made product with tons of adjustability. Check them out you wont be disapointed.

A little off topic...

Did you have any problems with the cables being too short once the risers were added?

I'm interested in the cable length/Rox riser combo as well. At 6'5", something higher would be nice, and doing this is within my level of expertise!

No problem at all with the stock cable length. I have the 2" risers and the Windam bend pro tapers. It's nice being able to stand up and not feeling like I am endoing.

how do you think they'd effect me at about 5'10"-5'11"??

I am 6'2" and they are perfect. I come from a motocross backgound and adding the2" Rox Risers to my L made the rider position feel much better, I absolutely think they would be for anybody 5'8" and up.:worthy:

Many thanks for the replies, I think I may go for the Enduro highs, unless I get more feedback before Christmas.

Plus 1 on the Pastrana FMX's. Love them and the minimal sweep. Keeps the ole wrists straightened up.

How tall you are, Husky?

6' 2"

I am 6,6" and the Renthal FATBAR Carmical HIGH is 4.25 High.

The Pastrana bars are Just a bit higher at 4.5 but are 1.5 inches narrower.

I AM REALLY HAPPY WITH THE RENTHAL CARMICAL HIGH BEND!!!:worthy:

A little off topic...

Did you have any problems with the cables being too short once the risers were added?

i also have 2" ROX RISERS. no issues with the cables either. although the cables are motion pros that came with my FCR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now