Oil overfill xr650

I overfilled my oil. Doing to many things at once, I had forgot I already filled the bottom end:bonk: . It's already drained to the proper level. Any problems leaving the to much oil up top?. I know if the case was full thats a problem, but don't see problem overfull up top. Anyone?

It depends on how much over it is. If it is a lot it will get blown out the breather and cause a big mess. It's easy to just let a little out of the frame tube drain until you get it back to the correct amount.

Your L?? How do you fill the bottom end?

my bike was over filled and run for a while......ruined the valve guide seals and makes the bike use 1lt oil ever hour !!!!! ridiculus

Drain some from the lower drain bolt.

If there is not sufficient room in the top resevoir, the return line may build pressure and cause???????????

At least oil leaks.

If unsure, I would drain it to empty then put in the right amount of new oil in.

I change my oil so frequently that I have never had to top it off :worthy:

If unsure, I would drain it to empty then put in the right amount of new oil in.

I change my oil so frequently that I have never had to top it off :eek:

:worthy: :worthy: :worthy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now