Chain Roller

[Metric Mark]

I bought a kick stand http://www.trailtech.net/5002-YZ-WR.html for my YZF 450 and when I installed the lower bolt, which replaces the stock bolt that goes through the roller, I didn't torque it...I don't even know what the torque specs are on it but the bottom line is I lost the bolt and roller in the desert. What are the torque specs if any on this or how tight do I need this to be?

I've searched for this topic and can't find anything.

[tnl]

I bought one on Friday from trailtech too. Don't know what the spec's are on it but I would use red lock tight on both bolts just in case. Mine is rubbing the swingarm (even with spacers installed) when my swingarm is in about half of it's travel down. Gotta call them on Monday.