New Edelbrock With A Worked Motor..settings?

just picked up a new edelbrock carb for my XR650R and before i try to figure out the jetting i'd thought i'd ask if anyone could give me some pointers. The carb is set for a stock 650r but my motor has had some work done to it. any thoughts would be appreciated.

unckorked, KN

full exhaust

high comp stock bore piston

over sized valves

ported head

stage 2 cams

knife edged.balanced crank

carillo rod

over sized main bearing

I asked this question before and was told to call Barnums. They should have the answer for you. They do a lot of work with the Edelbrock carbs.

Also, are you having to run race gas with that piston, or is high octane pump gas working?

I asked this question before and was told to call Barnums. They should have the answer for you. They do a lot of work with the Edelbrock carbs

Also, are you having to run race gas with that piston, or is high octane pump gas working?

Ill give em a call..thanks for the tip<P>

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now