tips on keeping those white plastics white?

i have a 08 yz 450 and they plastics are painful to keep white, every time i ride a brown stain gets on them where my knees rub. i have tryed using gumption a household bathroom cleaner.

any other suggestions would be great

kerosene....I use it to clean my air filters too.

Turtle Wax Chrome Polish-rubs the stains right out. Use it just like if you were polishing your bumper.

http://www.turtlewax.com/main.taf?p=2,1,4,12

Even works on iron ore stains you pick up in places like N MN.

Suzuki Bike Wash!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Soft Scrub works.

Mr clean magic eraser works the best. but even the heavy duty ones are only good for 1 wash.

comet cleanser powder, make a paste in a rag and get after it.

works on mine.

Mr clean magic eraser works the best. but even the heavy duty ones are only good for 1 wash.

these things are amazing, not only on bikes, but on anything a 2 year old can right with where a 2 year old is not supposed to write, walls, furniture, motorcycles, etc...............:thumbsup:

I use a product made by Spartan Chemical Co. called BH38.

I wash my whole bike with it (think Simple Green but better), and I use a scrub brush on the shrouds where my knees grind in the dirt. Comes out looking great.

mr. clean wipes...i asked the same thing last year and they work AWESOME!

Simple green, the green brillo side of a sponge, and elbow grease. Very economical.

Go to home depot or lowes and get some goof off. Put it on a paper towel and the plastic comes right back without any elbow grease. It will even get the dirt out of the shroud decals. It works awesome.

WD-40 works good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now