help with free mods.

i have been reading about the free mods for wr400 but the pictures of the carb i found dont look the same as my carb, there doesnt seem to be a throttle stop that stops full throttle. it is a 98 model wr400 is this model different, i have searched on here but cant seem to find the answer.

thanks for any help:worthy:

Says you are from across the pond... did the UK WR have the throttle stop on it from the factory?

If you bought the bike second hand the mod may have already been done. ask the previous owner if thats the case.

cheers

as far as i am aware its a german model. the previous owner doesnt know.

is there an easy way of checking if its been done?

aayj4.th.jpg

I think your best bet is to follow the instructions here and take the throttle stop you have and compare it to a YZF throttle stop...good luck mate!

cool i will give that a try thanks

as far as i am aware its a german model. the previous owner doesnt know.

is there an easy way of checking if its been done?

aayj4.th.jpg

The throttle stop screw is shown in your picture here. It looks like it has been backed out though, and I see some sort of thread locker on it. It is at the left hand side of the picture and goes up behind the pulley that holds the throttle cables. You will still want to compare it's overall length with a YZ throttle stop unless you can get someone to give you the measurements. Hope this helps.

Josh

i have found the measurements from the link prime gave me so i will give that a go and check see if it has already been cut down.

thanks for your help

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now