ECXEL rims and TALON hubs XR650L ???

Does anybody have one or know if they make one for the XR650L or XR600? I've tried to do a search but couldn't anything. I've come accross 36 holes 21 inch front but not 32 holes. Thanks in advance.

There is a company called Motostrato,I think I spelled it right?

Anyway,they sell 17 inch wheels for the XRL and also a motard kit that comes with wheels,tires,fender,etc.I was thinking of the same.Hope this helps.Also you can adapt CBR 600 F3 wheels to the XRL with a little work.

There is a company called Motostrato,I think I spelled it right?

Anyway,they sell 17 inch wheels for the XRL and also a motard kit that comes with wheels,tires,fender,etc.I was thinking of the same.Hope this helps.Also you can adapt CBR 600 F3 wheels to the XRL with a little work.

I think you mean motostrano?:prof::busted:

Are you looking for a Supermoto setup or just better dirt wheels?

Talon makes a hub for front and rear, they are 36 hole.

http://www.thumpertalk.com/forum/garage.php?do=viewattachment&attachmentid=13913

Before I did the USD forks, I had a Talon front hub for an XR650R on my bike. Talon makes a hub for both the XRL and the XRR, the difference is that the XRR hub allows you to run more common 320mm front disks for SM. The XRR hub/wheel bolts right in. There are odd ball 320mm disks (RAM, spelling??) for the XRL, but I wanted to use a MotoMaster or Brembo.

PM if you need help,

MGS

I know they make them for the 650L with stock or crf USD forks.

pic-2.jpg

Motostrano is a good place to get them.

I'm just looking for better wheels and spokes. I prefer stock sizes 21 front and 18 rear gold anodized rims. I just can't find a 32 hole front rim. The rear rim w/ 32 holes are pretty common to find. I was planning to lace and true the excels with buchanan spokes to stock rim hubs. I think this the cheapest alternative as oppose to supermoto setup. Although it's in mind once i find the funds for it. Thanks!

I'm just looking for better wheels and spokes. I prefer stock sizes 21 front and 18 rear gold anodized rims. I just can't find a 32 hole front rim. Thanks!

1.60x21 32H A_405 IC_405 YZ125/250 '87 :thumbsup:

A_405 IC Is that the part number for the 21 x 1.60 with 32 spokes Excel rim? Is there an excel web site that i can browse and do a search? Thanks!

There is a set of older gold rims for a xr 600 on ebay right now. Very cheap, and should work!

I have a set of Tallon/Excell wheels on my XR600.

127310761-M.jpg

After numerous searches, I found a company that sells PRO WHEEL rims gold anodized as a set for $175 plus $30.00 shipping. They assured me that they can obtain a 21 x 1.60 and 18 x 2.15 rims both with 32 holes. Anybody have any experience with the PRO WHEEL rims? How is the quality as far as fit and finish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now