Revisited: Best Tires for a "L"

Where do these Mefos come from?

You order them from here

http://www.klr650.com/MEFO%20Sport%20Tires.htm

but they are made in Germany.

I'm sure in time when more companies start handling them the price might come down (I hope) some but right now this place is about the only one I know that sells them in USA.

Cut the price in 1/2 though if you get double the milage of most tires and they are in the ballpark for sure.

Free shipping to boot!

MEFOcomposite.jpg

Free shipping to boot!

MEFOcomposite.jpg

Free shipping :excuseme: ALWAYS ???

I think I am being charged shipping :naughty::excuseme:

Is the front tire a bit wider then a stock one or the same size?

My bike didn't have the stocker on when bought, so not sure of stock size.

The free shipping is like having 10-12 bucks off a tire s that maks the deal a bit sweeter, not for me though :cry:

Guess I'll call and ask about it.

Please let me know how you got the free shipping.

Do I see a stock coated header on your bike or that's after market?

I think you have to buy 2 tires or over a certain amount to qualify. If you got 2 tires, I got free shipping from them the last 2 times. Ask them about it and see if it "jogs" their memory. They were pretty good about it and that is why I went back to them again.

I think you have to buy 2 tires or over a certain amount to qualify. If you got 2 tires, I got free shipping from them the last 2 times. Ask them about it and see if it "jogs" their memory. They were pretty good about it and that is why I went back to them again.

How recent? I just ordered mine (2 tires)a bit over a week ago. I even asked how much shipping was and no metion that it was free, think she said 23 bucks.

I'll call tomorrow and see what's up

More great pic's, thanks! :thumbsup:

Last set I got was only a couple weeks ago. I JUST got the cc bill.

Just noticed On/Off your from Maryland, where abouts dude?

OH, and jonr3, we apologize for turning this into a :blah: :blah: :blah: MMD .... Major Mefo Discusion

Just noticed On/Off your from Maryland, where abouts dude?

OH, and jonr3, we apologize for turning this into a :blah: :blah: :blah: MMD .... Major Mefo Discusion

That's fine with me. The more I read about the Mefos, the more I like 'em!:applause:

Got my Mefo's.

No shipping charge :applause:, so really it's like taking 10 bucks off each tire.

My rear is a 120/80X18 though, not a 130 .

Front tread is 2 plies nylon, rear 3 plies. Guess that (says TREAD, not sidewall) means the whole tire though, sidewall and all :excuseme:

So the 130 has about 3/8" (10MM) taller sidewall, is that what that means ?

How much road air pressure do you guys run ?

Got my Mefo's.

No shipping charge :applause:, so really it's like taking 10 bucks off each tire.

My rear is a 120/80X18 though, not a 130 .

Front tread is 2 plies nylon, rear 3 plies. Guess that (says TREAD, not sidewall) means the whole tire though, sidewall and all :excuseme:

So the 130 has about 3/8" (10MM) taller sidewall, is that what that means ?

How much road air pressure do you guys run ?

The 130 is 10mm wider than the 120, if they are both "80" tires, the 120 is 0.8x120 or 96mm tall, and the 130 is 0.8x130 or 104mm tall.

Dave

The 130 is 10mm wider than the 120, if they are both "80" tires, the 120 is 0.8x120 or 96mm tall, and the 130 is 0.8x130 or 104mm tall.

Dave

In other words, not a heck of a big difference :lol:

Thanks for the equasion.

Got my Mefo's.

No shipping charge :applause:, so really it's like taking 10 bucks off each tire.

My rear is a 120/80X18 though, not a 130 .

Front tread is 2 plies nylon, rear 3 plies. Guess that (says TREAD, not sidewall) means the whole tire though, sidewall and all :excuseme:

So the 130 has about 3/8" (10MM) taller sidewall, is that what that means ?

How much road air pressure do you guys run ?

Hey Huffa 2,

I just read where you got your new meats installed about an hour ago but haven't had a chance to ride it yet. Let us know what you think after you take if for a spin. Also, are you running stock wheels? How's the clearance on the new Mefos?

Hey Huffa 2,

I just read where you got your new meats installed about an hour ago but haven't had a chance to ride it yet. Let us know what you think after you take if for a spin. Also, are you running stock wheels? How's the clearance on the new Mefos?

Yep, stock wheels. Clearence is fine, I have abot 3/8 " at the bottom front of the chain guard, as in pic. ON/Off's on here are just a bit wider, (120 verses 130) his might of rubbed just a hair or have like an 1/8 " gap ?

BTW, what road pressure should I run, at least 25lbs, On/Off ?

:busted: Like my new nickel plated chain?

It should ride like a cadillac now, being that my rear was really worn and had a DOT Michelin AC 10 knobbie on the front, the AC 10 ........no good at all for the road, it wears REALLY quick.

DSC04642.jpg

Arrgh... so clean... my eyes!

Arrgh... so clean... my eyes!

That's funny ....... and your dirt would hurt my eyes ! :p

Nuthin nicer than a new set of rubber. I run a lot of high speed highway and keep mine around 36lbs. I have heard of guys who ran low pressures at high speed for a while that had chunking or cracking due to heat from more flexing? Mine seem to be wearing well at higher pressures, but if running a lot of dirt, I would probably air down to the 20s and bring it back up for slab. Keep us posted! If in mud, keep up your revs to clear the tread and you will be surprised what that back tire can do. Front can wallow or slide in messy mud so watch our front end washout in those conditions. OVERALL, I am VERY happy with mine. Hey a couple video clips for ya!

http://photos.imageevent.com/peteh/motorcyclepics/PeteonXR.wmv

AND why my neighbors love me :busted:

http://photos.imageevent.com/peteh/motorcyclepics/XRwheeliesindriveway.wmv

Now get out there and RIDE!

http://photos.imageevent.com/peteh/motorcyclepics/HardleyslowindownXR650L.wmv

Or just a country ride...

stream.jpg

I read that same thing too onoff but don't forget our bikes are a good deal lighter then those bikes I think and not sure if we need the max tires will take?

I took it out last night and it is DEFNITLY one smooth tire. It rides every bit as smooth as the battlex street tires I have on my 700S Nighthawk, no kidding, they just can't get any smoother! :thumbsup:

Now as they get older I can't say if they get a bit noisy or what but that's my outlook right now on them.

I'm still "scrubbing them in" I think it's called so didn't push them in the corners or anything yet. I'm running mine at 32R 30F for now but am going to make two calls to both dealers to see what they suggest.

Here is another place I found that has them!

http://www.angelfire.com/ut/moab/parts_frames.html

Nuthin nicer than a new set of rubber. I run a lot of high speed highway and keep mine around 36lbs. I have heard of guys who ran low pressures at high speed for a while that had chunking or cracking due to heat from more flexing? Mine seem to be wearing well at higher pressures, but if running a lot of dirt, I would probably air down to the 20s and bring it back up for slab. Keep us posted! If in mud, keep up your revs to clear the tread and you will be surprised what that back tire can do. Front can wallow or slide in messy mud so watch our front end washout in those conditions. OVERALL, I am VERY happy with mine. Hey a couple video clips for ya!

http://photos.imageevent.com/peteh/motorcyclepics/PeteonXR.wmv

AND why my neighbors love me :busted:

http://photos.imageevent.com/peteh/motorcyclepics/XRwheeliesindriveway.wmv

Now get out there and RIDE!

http://photos.imageevent.com/peteh/motorcyclepics/HardleyslowindownXR650L.wmv

Or just a country ride...

stream.jpg

nice videos!:applause:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now