Tail light brightness pic's please .

I'm interested (thinking about it) in putting a Baja Design (think that's what this is?) tail light set up like on the bike in this pic and am hoping someone would take 2 shots, one of tailight on at night and one of tail & brake light on.

I want to compare how bright it is to the stock set up.

Pic's were taken about 3-4' away.

Also, :excuseme: does the Baja one iluminate the plate what so ever ?

taillight.jpg

taillight .......

DSC04626.jpg

Brake and tail ..........

DSC04624.jpg

Unless you have a digital camera that can control exposition and set it to a preset level, the pictures will look more or less identical since the camera will adjust the exposition to the light level.

I've tried something similar to compare headlights some time ago and the difference on the picture was way less than the one I could observe by eye.

I just picked up one of those LED replacement bulbs for my XR (1157 bulb) It is running & brake lamp. Nice, bright light, and is supposed to last a lot longer than incandescent bulbs (which I used to blow out all the time). Only 9.99 at your local Pep Boys

Huffa, check this tread out. I posted some pics over there too.

http://www.thumpertalk.com/forum/showthread.php?t=501822&highlight=whiteman

Thanks White man, I saw that before.

I REALLY STILL would like to see one at night even if it isn't totaly accurate in brightness.

I don't want one any LESS bright then the stock unit.

Come on, some one can give me a couple night shots, after all, it is a LIGHT.

What do ya say Whiteman :excuseme: night shots please?

I'm interested (thinking about it) in putting a Baja Design (think that's what this is?) tail light set up like on the bike in this pic and am hoping someone would take 2 shots, one of tailight on at night and one of tail & brake light on.

I want to compare how bright it is to the stock set up.

Pic's were taken about 3-4' away.

Also, :excuseme: does the Baja one iluminate the plate what so ever ?

taillight.jpg

i had the Baja Design on mine. it was quite bright at night simular to the OE :thumbsup: but very easy to kick & brake throwing the leg over :banghead:

sorry i have no night shots.

CLIC ON PIC FOR BIGGUNS:

normal_XR630RN%20-%2019-3-07.JPG

i now run a CYKEL LED taillight PART NO: 124-TKTO

http://www.cykel.com.au/Moreproducts.htm

edit:

also both taillights had poor earths so i made an extra earth.

BD's under fender led rear brake set up. Photos shot in a dark garage. Very clean, not problems yet, but you will have to change the rear fender- it will give your bike look a more modern look

http://s109.photobucket.com/albums/n43/philipstjohn/?action=view&current=XR650R001.jpg

http://s109.photobucket.com/albums/n43/philipstjohn/?action=view&current=XR650R002.jpg

WOW, that's BRIGHT !!

Want the stock fender though and taillight up top but thank you very much for the pic's, may help someone else out .

WOW, that's BRIGHT !!

Want the stock fender though and taillight up top but thank you very much for the pic's, may help someone else out .

Huffa - I will have pictures tonight. I took them last night & forgot to bring them to work. I have them from behind & the side views.

Huffa - I will have pictures tonight. I took them last night & forgot to bring them to work. I have them from behind & the side views.

Cool and Thank You ! :thumbsup:

Great pic's .......They work fine.

They seem waaaaay brighter then the stock one for sure. :applause:

So where did you gets yours at and does it fit the stock fender or is that a XR fender you have?

i had the Baja Design on mine. it was quite bright at night simular to the OE :thumbsup: but very easy to kick & brake throwing the leg over :banghead:

sorry i have no night shots.

CLIC ON PIC FOR BIGGUNS:

normal_XR630RN%20-%2019-3-07.JPG

i now run a CYKEL LED taillight PART NO: 124-TKTO

http://www.cykel.com.au/Moreproducts.htm

edit:

also both taillights had poor earths so i made an extra earth.

The one like walshdanielm1965 was very easy to kick :excuseme: Seems out of the way to me?

The one like walshdanielm1965 was very easy to kick :excuseme: Seems out of the way to me?

I'm 6'4" and found it very easy to throw the leg over & not kick. It was actually harder to do with the stock light.

4 stokes only

here you go:

http://www.fourstrokesonly.com/Taillight44-0181.html

I ordered from a local dealer in Cali.....

Thanks Buddy! :thumbsup:

So I would need .....

1) light

2) Wire Extension Kit For The XR-L Models (green 3 connector or yellow 3 pin connector) ....which one though, green or the yellow :excuseme:

3) license plate cushion plate (is this on yours, hard to tell??)

.........and that's it ?

Thanks Buddy! :thumbsup:

So I would need .....

1) light

2) Wire Extension Kit For The XR-L Models (green 3 connector or yellow 3 pin connector) ....which one though, green or the yellow :excuseme:

3) license plate cushion plate (is this on yours, hard to tell??)

.........and that's it ?

I bought Light #1 & plate #6 & wiring harness #9

#6 under the plate, used old bolts from stock plate & light (blue locktite on all bolts)

#9 I took off my seat and told the guy what I saw....and I can't remember....lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now