While cleaning up my brake Caliper I popped off the silver cap off one of the pistons! (even distorted a little). Can I just reinstall this cap after some careful reshaping ? (While cleaning/twisting the pistons which were still in the caliper the top popped off) If I buy the seal kit I dont think it will have a new cap for the piston, or can I buy just the piston? Should I just put in the new pads and install everything to get my brake up and running or get the new seal kit. (would like to get it at Honda if possible, there is a shop on the way home) The MC is a Nisssin 11 and I have a floating disk (cleaned and sanded smooth as best I can without taking to much off or creating warrped disk, I think it is original). Just to note: I bought this bike used and was planning on having the fork seals and brakes replaced due to fork oil on everything. Thou the brakes worked up till I took it apart..