What did you do to your WR today?

[byggd]

It's in the middle just forward of the bowl. Put a mirror looking up at the front of the carb, you'll see it. Here is a picture of a red adjustable one installed. Be careful when removing the OE screw that you don't lose the little o-ring and washer.

https://www.thumpertalk.com/forum/attachment.php?attachmentid=299&d=1132119988

[flynz]

Dee, if its like the 450's its on the engine side of float bowl it may have a cap over it.

[04WR450F]

I recently added a FMF Q4. ?

[Spoda]

New fork springs and oil, shock spring and UNI- rad guards...stoked!

[tribalbc]

Well today I put on new Regina chain and Ironman sprockets

[/img]

PMB endo and silent insert on my YZ exhaust

[tribalbc]

This week was new graphics

And a Flatland front disc guard

[tribalbc]

Last shot

[off_road_4_me]

I looked at some fresh graphics for her, thinking some throttle jockeys, my bikes an 01 so its a pain to find graphics for it.

[cagarren]

I finally gotta plate! Woohoo!!!!

[JSanfilippo]

I looked at it today. Rolled it around the garage. Checked the battery.

Pretty much gonna get flogged on monday

[Yama4fitty]

Hey all, new bike for me and first post around here.

I installed a few new items for the bike:

-Moose radiator cages

-Fastway FIT 2 handguards

-Works Connection rear master cylinder plate

-Sunline RC shorty front brake lever (OG broke hence the barkbusters)

-MORE TO COME...

[MountainMax]

I brought my WR down to a pit and played in it all day, took some video clips, here is one, what do you think about my editing skills, lol?

hmm, how do I embedd the video here??

http://www.youtube.com/watch?v=uB7IQGvlQVU

http://www.youtube.com/watch?v=http://www.youtube.com/watch?v=uB7IQGvlQVU

[flash=http://www.youtube.com/watch?v=uB7IQGvlQVU

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/watch?v=uB7IQGvlQVU&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/watch?v=uB7IQGvlQVU&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>

[YamaLink]

A friend sold his WR, and the buyer didn't want any of the extras/"fancy go-fast parts" so I got the leftovers. Braking-brand wave rotors and black Excel wheels with just a tiny chip in the back rim.

[roushxteam199]

finally got my bike done to be complete supermoto now

[roushxteam199]

[flynz]

I rode it hard this morning ? new suspension settings working great gets air a lot better now and goes through woops better too:applause:

[Demo_Slug]

installed 08yz head pipe on my 08wr. sounds deeper ? ,

haven't riden it yet,I just did half donuts in the backyard, seems strong but smooth on the bottom..

fit perfect. used the WR head gasket and it slipped in perfect to my leo vince x3 slip-on with no gasket.

[baksideDisaster]

So this is pretty crazy. Way back around August 2006 I was on a dirt bike road trip in Oregon and picked up a Rooster Performance Rear Brake Guard. Rooster is now defunct and well, soon after my trip I lost the brake guard somewhere in my garage. Well, this weekend while cleaning up, I found it wedged behind some tile. I immediately installed, as I had vowed never to put another rear guard on till I found the rooster! My stocker was barely holding on..

Stoked!

[MountainMax]

That's a nice looking guard, especially in blue

[Mtn-Track]

- All free mods except disconnecting the gray wire - the dealer said disconnecting the gray wire is a hoax and not recommended so they wouldn't do it.

~Adam

I had my Yami dealer do the AIS mod on my new 450 I got from them and they did the Grey Wire mod at the same time, on their own. I didn't think they would do it so when I checked, sure enough, it was cut and taped......

This is the same dealer that wouldn't touch the little Suzuki 50 quad I bought from them to make it run/pull better!?

Bike is going back to the tuner this week for more jetting on the dyno.