Need rejetting?

I'm putting on a FMF Powercore slip-on on my 07 wr450. Will I need to rejet it? I've taken out the snorkle,installed yz throttle and grey wire disconnect. Please advise.

Thanks

I would invest the money in the AIS kit from GYTR it's well worth the money.

They also sell a nice fuel screw.

It should be a nice setup with the fmf it's a little rich with the stock exhaust.

It's avaliable at any yamaha dealer

I'm putting on a FMF Powercore slip-on on my 07 wr450. Will I need to rejet it? I've taken out the snorkle,installed yz throttle and grey wire disconnect. Please advise.

Thanks

I put the Powercore on my 07 WR450. I also did the AIS removal and installed the JD Jetting kit at the same time. I followed the JD instructions and installed the red needle 4th position, 168 main jet and 48 pilot. It has worked flawlessly.

I followed the JD instructions and installed the red needle 4th position, 168 main jet and 48 pilot. It has worked flawlessly.

Sounds good to me, maybe try 5th position?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now