Fork springs for sale

[DaveJ]

All,

I have a set of Eibach .43 fork springs for sale that will fit the WR or YZ line of bikes.

I wouldn't recommend them for anyone under 150lbs, unless you're looking for a very soft ride.

I paid $79 for them from Race Tech, used them once, and will sell them for $40.

Reach me on the forum or at the e-mail address below.

DaveJ

dtjohnson@mindspring.com

[Guest Guest]

Dave, this may be a stupid question but are they softer or harder than stock and what is stock? Im 230# and Im definatly in the market for something stiffer.

If it fits my bill, I might be intrested.

Thanks,

------------------

Darin from Missouri - 1999 WR 400F

[John_in_Long_Beach]

Stock is .46 in the us, .42 (I think) in Europe.

Most suspension tuner consider the fork springs on the stiffer side. I believe they are the same springs as on the YZ.

For somebody of 230#'s you may/should get a stiffer rear spring.

[Clark_Mason]

I believe the stock fork springs are a 0.46 spring rate so these springs would be lighter. I run 0.43 with revised valving and a higher oil level. I about 220 and trail ride only no motocross.

Clark

[DaveJ]

Milkman,

Sounds like you have the answer. I think 230 is a little much for a .43 spring, but if I don't get any takers, I'll send em your way and you can try them out, and then you can either pass them on or toss em.

DaveJ

[Dougie]

Race Tech recommended .43 for me and I am 165 lbs. So I run them with the re-valve and oil level at 95. I do both trails and tracks. I love it.

[Guest Guest]

Well, if the .43 is softer than the .46 then it probably wouldnt do me any good. Im presently running YZ springs in my forks and I need to go stiffer than that. But thanks for the offer. I really appreciate it.

------------------

Darin from Missouri - 1999 WR 400F