Hey , Can someone help to find the problem with the stator I rewound I followed the instructions form 4strokes website, I started running the wire to the right ccw next one cw and so on.I'm not sure of the number of turn i did on each ,about 30 I think. Solder the wire together ,got 1 ohm from the green and white and yellow. I have checked the continuity to make sure no wire as been cut . I put back the stator in place before putting the epoxy ,the bike start perfectly but I don't have any power to the light .I've got the baja design kit already on it. I check with the volt meter nothing is coming out of the stator ? Anybody had the same problem?