i need cam help quick

when i tighten down the cam bolts on my 99 wr400f to proper specs, the exhaust cam is fine, spins free, but the intake cam is kinda tight, turns but with a little force. is this normal? or is something wrong?

Should spin freely. First, make sure you're not pushing against the valve springs. If you're not and it's still hard to turn, pull it apart and check for burrs, dirt, etc. Put it back together and retorque the bolts...make sure you do it in a cross pattern...

Also ensure that you have the circlip in the cam cap slot. This aligns the cam correctly with the other gears. Also if the cam is not lined up properly it will drag a little. Hope this helps.

Josh

Thanks guys, big help. got er done now and runs great.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now