Unibiker Rad Guard - '07 WR450

[JaysDirtyRide]

OK...just finished the Unibiker rad guard install.

It wasn't difficult but did take quite a bit of fiddling around to get it set up correctly.

I didn't take the rad off but I did disconnect the upper hose that connects the two halves of the rad.

I'd post pics but someone has already posted a bunch before so it would be redundant.

This sucker feels quite strong...it feels like it could take a tree whack without allowing the rad to be damaged.

I like the way it looks on the bike!

-Jay

[resinlips]

Nice! I put black ones on and love them. Dissconnecting the top hose was a must. I went back and used loctite on all the bolts.

[JaysDirtyRide]

Nice! I put black ones on and love them. Dissconnecting the top hose was a must. I went back and used loctite on all the bolts.

Hi resinlips,

I went with blue...I should have done a contrasting color. The blue is not a Yammi blue... I sound like the fashion police.

Anyway...I rode today and got a couple of interested inquiries from other guys. They look bitch'n.

-Jay

[xrmarty]

I'd post pics but someone has already posted a bunch before so it would be redundant.

-Jay

I say post the pix anyway. A picture's worth a 1000 words as they say:thumbsup:

[Humunn]

I've run Unabiker guards on all my bikes and most of my riding partners have done the same. I have the black ones on my 07 and they are the best yet.

Greg

[wakin]

I say post the pix anyway. A picture's worth a 1000 words as they say:thumbsup:

Envision it blue & with a headlight:thumbsup: These things are rock solid!