sub mount stabilizer and aftermarket clamps on 07 WR

Just wondering what tripple clamps work well for a sub-mounted Scotts stabilizer on your WR's. Pictures would be nice to give me an idea what it looks like. I'm planning on getting the 07 WR 450 this late spring/early summer. The installation of a stabilizer on earlier wr's is much like the honda xr due to the oil filler plug in upper frame. But what about the aluminum frame 07?

I have the SUB mount and like it a lot. I did not go with the triple clamp, I'm using my stock clamps with Scott's handle bar risers.

241906914.jpg

241906912.jpg

241906909.jpg

I've ordered the Scotts sub-mount system too (retaining the stock triple clamp), but it's been on back order for a while now. I'm getting impatient....:bonk:

I've ordered the Scotts sub-mount system too (retaining the stock triple clamp), but it's been on back order for a while now. I'm getting impatient....:bonk:

BRP has them in stock, Just got one for our 07 YZ250f.

I have the SUB mount and like it a lot. I did not go with the triple clamp, I'm using my stock clamps with Scott's handle bar risers.

241906914.jpg

241906912.jpg

241906909.jpg

Looks sweet!

I could be wrong, but I guess it doesn't matter what kind of tripples one uses, as long as the risers fit.

Looks sweet!

I could be wrong, but I guess it doesn't matter what kind of tripples one uses, as long as the risers fit.

I just mounted the BRP kit on my 07' and it is a nice kit. From the pics above I don't see much of difference between the BRP and the Scotts kit. The BRP kit cost me $325. The BRP kit states that their mount works with the stock triple clamp and SOME aftermarket clamps....

I am very happy with the BRP kit:thumbsup:

BRP has them in stock, Just got one for our 07 YZ250f.

Does that include the steering neck clamp, and the submount/riser?

Does that include the steering neck clamp, and the submount/riser?

My BRP Kit did and the more I look at your pics, the the steering neck clamp looks 100% Identicle. My stabilizer also came with the larger thumbwheel adjuster :bonk:

My BRP Kit did and the more I look at your pics, the the steering neck clamp looks 100% Identicle. My stabilizer also came with the larger thumbwheel adjuster :bonk:

Rumour has it BRP makes the kit for Scotts.

How much does the submount raise the bars from stock on the 07's

How much does the submount raise the bars from stock on the 07's

It emulates the stock forward position & 1" up.

I just mounted the BRP kit on my 07' and it is a nice kit. From the pics above I don't see much of difference between the BRP and the Scotts kit. The BRP kit cost me $325. The BRP kit states that their mount works with the stock triple clamp and SOME aftermarket clamps....

I am very happy with the BRP kit:thumbsup:

Can I ask where you got the BRP kit from for $325 and was that for everything.

It emulates the stock forward position & 1" up.

FYI, I installed the riser/submount yesterday. The number plate mounting bolt location interfers with the mount fitting properly.

I had to remove about 1/2" of material from the Web between the two bar mount towers.

06 and 07 YZf's will have this same problem.

I called BRP and they are redesigning the aplication.

The part works fine now but its a little frustating having to uglify a part thats suposed to fit properly. :thumbsup:

FYI, I installed the riser/submount yesterday. The number plate mounting bolt location interfers with the mount fitting properly.

I had to remove about 1/2" of material from the Web between the two bar mount towers.

06 and 07 YZf's will have this same problem.

I called BRP and they are redesigning the aplication.

The part works fine now but its a little frustating having to uglify a part thats suposed to fit properly. :thumbsup:

Will this be a problem on the WR's too?

On a side note, I was told yesterday (by a guy in a local shop) that the only way to go with a submount stabilizer at this time is to retain the stock tripple clamps.

If this is true, I'll have to go with a standard mount. Kind of disappointing though...

Hey guys, I just ordered a BRP SUB mount + Scott's dampner kit for HS racing and wondered if you had any updates on your's? I will be mounting mine up with the stock tripple clamps and bars, BONZ bar clamps and Cyrcra Pro Bends. Any additional feedback on fitment, performance, etc would be great - pics would be cool, too (the shots in this thread don't work anymore). Also wondering how much you noticed the 1" higher bars. I'm hoping it won't be too bad with the relatively flat Pro Tapers.

Thanks for any feedback. Mark

I got a slightly use 06 yz setup for mine.

DSC00806.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now