Sign in to follow this  
Followers 0
Jammer

07 WR450 TT AIS removal kit - tip

2 posts in this topic

Just installed the TT AIS removal kit. The OE fitting at the front of the head, held on by 2 screws, is difficult to get at the 1 screw due to the rad pipe & hose getting in the way. I used an allen key with a "ball" end on it - so you can turn allen head screws with the wrench on an angle. Worked perfectly and I didn't need to drain the coolant, remove the hose, etc.

Share this post


Link to post
Share on other sites

Also when using the ball end allen wrench loosen the hard to get at bolt first and take it out before the easy one and then reverse the procedure for reassembly. WR Dave.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0