Sign in to follow this  
Followers 0
TeamScream

Comparing the 05 rear fender to the 07 rear

7 posts in this topic

I need some help guys.

I hope someone on here has both an 05 and an 07 they can look at for me.

I am trying to use an 07 rear fender with my 05 (converted) plastics.

I like the 07 WR rear tail light and need to know if the fender mounting holes to the sub frame are all in the same place?

I have (2) 2002 WR426F's that are in supermoto trim which have been converted to 05 bodywork, and would like to run the 07 rear fender.

Anyone who can check this out for me before I buy the fenders would be a big help!

I really appreciate it.

P.S. here is one of the bikes.

0631-2.jpg

Share this post


Link to post
Share on other sites

The rear fenders are considerably different up underneath where it attaches to the sub frame and fits up against the air box. The sub on the aluminum frame is different than that on the steel one. You might "make it work", but it won't bolt straight up.

Share this post


Link to post
Share on other sites

Hey Gray,

Thanks for the reply.

I have completely converted these bikes to the 05 set up including the 05 aluminum subframe.

With that considered, do you think it is a bolt on?

Thanks bro.

Share this post


Link to post
Share on other sites

No, because, as I said, the sub, air box, etc., are all different parts for the aluminum framed bikes than they were for either version of the steel bikes.

Share this post


Link to post
Share on other sites
I need some help guys.

I hope someone on here has both an 05 and an 07 they can look at for me.

I am trying to use an 07 rear fender with my 05 (converted) plastics.

I like the 07 WR rear tail light and need to know if the fender mounting holes to the sub frame are all in the same place?

I have (2) 2002 WR426F's that are in supermoto trim which have been converted to 05 bodywork, and would like to run the 07 rear fender.

Anyone who can check this out for me before I buy the fenders would be a big help!

I really appreciate it.

P.S. here is one of the bikes.

0631-2.jpg

That bike is like looking at porn! Great job! What did you use to paint the engine cases black?

Share this post


Link to post
Share on other sites

0631-2.jpg

man i swear that is a toy. it looks like a small little dirt bike that my little brother would play with. this isn't a dis or anything:busted: , its just it looks a picture of a toy:excuseme: . thats definitly a hottttttt ass bike though :censored:

Share this post


Link to post
Share on other sites
That bike is like looking at porn! Great job! What did you use to paint the engine cases black?

Heheh, thanks!

Thats the old engine, this is one of the new engines, however it is NOT the one going into this bike, as I said I have 2 and this engine is for the "B" bike, which will mainly be for my wife to put around on, and also my bro's when they want to go for a canyon rip.

The "A" motor has black wrinkle on the primary case cover as well, which this one will have as soone as the new (used) cover I just bought comes in and I can get it to the powder coater.

I did the primary case cover on this engine in solar black to see if the contrast would look good but I like the all wrinkle effect of the other motor so this is temporary.

This is porn.

P.S. the little specks you see are just dust, trust me this thing is spotless, and the little discoloration on the head is an oil smear from taking it out of the bag.

More pics to follow when these make it into the bike(s).

NewEng-1.jpg

NewEng-2.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0