Skid plate install, XR650L

Just recieved my Moose skid plate from the UPS guy and it's really really cold out in the shed so I'm staying in.

It didn't have any installation instructions, pictures etc.

Does anyone here have any instructions, pictures etc. for placement of the clamps, order of assembly etc?

i have the same one on my bike, works really good :ride: unfortunately i cant find the instructions but i remamber it being really easy and self explanatory when you have it and the bike infront of you. took 10 mins to install.

Looks like that set of bars that the XRL uses as a skid plate needs to come off. Is that right?

That would explain all of those I see listed on Ebay.

Hope it's warmer tomorrow.

Looks like that set of bars that the XRL uses as a skid plate needs to come off. Is that right?

That would explain all of those I see listed on Ebay.

Hope it's warmer tomorrow.

That's correct, the stock unit comes off.

When you install your Moose skid plate, put the front bolts in first, but leave them loose, so the skidplate just hangs there. Gives you more room to get the rear clamps in place.

Make sure you use locktite..

Very Easy Just Sit Down And Look At It .its S Elf Explanetary

My skid plate fit right over the stock bash bars with no loss of ground clearance, and they have helped to absorb a few hits.

I used the clamps, and just left off the front mounting bolts.

Dave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now