? on Stage 1 hotcam in06 XR650R

Just need some info

1. the spring loaded oil spout under the stock decomp. mech., does it stay in or come out

2. the decomp. lever and cable., do you just disconect it or set it so it does not incage

anyone?

I'm not sure on the correct way of doing it.....I decided to leave mine in. Reason being that it would appear to keep the oil curcuit pressurized. One thing i wish i paid more attentioin to is the cam bearing next to the cam gear. It has a specific orientation with one side of the bearing being open and the other closed. This plays into oil pressure flowing through the cam. I must have done it right cause i have at least 1000 miles and everything is great.

Thanks, now you got me wondering on the bearing

The ride side has the seal on the outside

The left side ?

Just need some info

1. the spring loaded oil spout under the stock decomp. mech., does it stay in or come out

2. the decomp. lever and cable., do you just disconect it or set it so it does not incage

Got the answer from Hotcam

The decomp lever and cable CAN stay

The spring loaded oil spout under the OEM assy on the Stock cam, MUST come out

Did they say why? You got me stressing out.....

They told me it could fly out and hurt the top end/ bottom end

I also talked to a shop called Pro Tech East, he is a freind of mine and he told me the same thing

He was a Honda Tech Trainer for years as well as a dam great mechanic.

He runs a suspension and race shop now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now