TPS Recalibration instructions

Fellow riders does anyone have instructions on how the recalibrate a disconnected TPS on a 06 YZF450?

Check page 6-10 of your manual.

Check page 6-10 of your manual.

thanks Grey I knew that was in there somewhere.....:lol:

Lesson learned...never unscrew the Torx screw on your TPS unless you mark it and the carb at the same time.....a major pain in the @$$ to recalibrate.....:lol:

Not bad once you've done it a few times. :lol: Automotive TPS sensors set up the same way. Just hook up a DVOM and roll it around 'til the numbers are right. Some are fixed (non-slotted), and you have to use a computer or other interface device to program the ECM to identify closed throttle and WOT.

Not bad once you've done it a few times. :lol: Automotive TPS sensors set up the same way. Just hook up a DVOM and roll it around 'til the numbers are right. Some are fixed (non-slotted), and you have to use a computer or other interface device to program the ECM to identify closed throttle and WOT.

yea but I bet you can get to all the necessary stuff unlike a TPS on a 06

yea but I bet you can get to all the necessary stuff unlike a TPS on a 06
Most of the time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now