Jump to content

Help With WR450F


Recommended Posts

The early WR starters ('03, '04) commonly went bad. Something about shorted windings. Try removing it and cleaning it, and maybe looking for shorts in the windings, which would require stripping the formvar and re-soldering.

You may just need a new one.

Link to comment
Share on other sites

I am on my second starter on my 03. It had the same issue and it was intermittent at first and slowly got worse over 6 months. Finally the motor could not turn over the engine anymore. I beleive you can buy the brushes and clean & rebuild the motor for a lot less than the price of a new one. I dont think the windings were damaged :cheers:

Link to comment
Share on other sites

It was running fine until a tree branch hit my handguards back and got the ignition button stuck making my starter crank when my bike was running. It was on for about 15 seconds. After I stopped to fix it then my electric start wouldn't crank but I can hear the relay clicking. Do you think I have to buy a whole new starter or change the brushes?

Link to comment
Share on other sites

It looks like there are a couple common problems with the 03 starting systems. On my bike if the starter doesnt crank over I can put the bike in gear and rock it the starter will work again. It seams like there is a dead spot in it.

https://www.thumpertalk.com/forum/showthread.php?t=303319&

I think I am going to consider doing the 03 to 04 starter mod.

http://wr450.com/photos_frame_full.htm

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...