Need Help with Bar mounts!

I replaced my handle bars on my 2006 wr450 with Renthal twin wall handle bars. I used Pro Taper universal bar mounts to make them fit. I just purchased some Fastway FIT handguards. They mount to the bar clamps by replacing the top portion of the bar mount. However, they don't work with the Pro Taper universal mount because it uses offset bolt postions. Who makes a 1-1/8" bar mount that replaces the stock bar mount completely. I see you can buy a GYTR oversized mount for a 06&07 YZ450. It doesn't list the WR as having one. Are the top clamp on a YZ the same as the WR. I don't want to buy a new triple clamp. I may have to go with Cycra set up that attaches on the triple clamp.

:cheers::bonk::p

Just order the stock(YAMAHA) upper and lower bar mounts for the YZ. They will bolt right on to your stock top tripple clamp. That's how I went with oversized bars on my '06 WR450. Hope this is the info you were looking for.

5XC-23441-90-00 HOLDER, HANDLE UPPER

5XC-23442-90-00 HOLDER, HANDLE LOWER

http://www.yamaha-motor.com/sport/parts/home.aspx

Just order the stock(YAMAHA) upper and lower bar mounts for the YZ. They will bolt right on to your stock top tripple clamp. That's how I went with oversized bars on my '06 WR450. Hope this is the info you were looking for.

5XC-23441-90-00 HOLDER, HANDLE UPPER

5XC-23442-90-00 HOLDER, HANDLE LOWER

http://www.yamaha-motor.com/sport/parts/home.aspx

That's what I wanted hear!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now