Hotcams:"Good luck starting your bike!! Breake a leg!"

Posted a thread yesterday, while I still was out of controll.. It was deleted and SC told me to take a beer and a couple of deep breaths.. So I did..

Yesterday when I was trying to start my bike it fired back and broke the kick axle! This got me pretty darn ......! Cause I know a new axle is going to kost me a kidney here in Norway!

So next time I by something, ofcourse listen to you guys at TT. And dont belive what the manufacturer says. Since they stated that the cams would give a significant power increase I persumed they have tried it! I read the threads on hotcams here on TT, but figured I should be able to kickstart the bike. After installing it it became obvious to me that hotcams could never had tried to fit that cam into a wr 450 since the decomp didn`t work at ALL! Cause making the decomp work is the worlds smallest problem, I cant understad how they could start production of a cam that dont work as its supposed to!

So no respect at all for the people at hotcams and Im happy that my leg didnt breake as I was thrown of the bike!

-Another unsatisfied customer

PS: Do anybody know if there is someone that makes kick axles of titanium or some other metall that is a lot stronger than the original kick axle? Hotcams maybe? hehehe!

The kickstart lever gets beat up where it hits the footpeg while starting. After a while you WILL develop a crack there and it'll break. When I bought my YZ the previous owner had ziptied a small 1/4" thick piece of aluminum to the kick stand so that takes the abuse instead. Simple, cheap, effective.

The kickstart lever gets beat up where it hits the footpeg while starting. After a while you WILL develop a crack there and it'll break. When I bought my YZ the previous owner had ziptied a small 1/4" thick piece of aluminum to the kick stand so that takes the abuse instead. Simple, cheap, effective.

Dint break the kickstarter, broke the kickstarter axle! The kickstarter is easily duplicated in Alumek or some other more ridgid metall, but the axel isn`t that easy to make!

If the kickstarter broke I would asume it was because of the reason you mentioned, but I never kick that far down, just to avoid hitting the fotpeg..

Are you saying we should not go for hotcams ?

What about YZ exhaust cam ?

my 06 runs better with a yz exhaust cam and has the same lift and duration.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now