16 tooth front sprocket

i'm looking for a 16 tooth front sprocket for my 2002 xr650r. i did a search but could'nt find anything. does anyone make one?

thanks!

I've never heard of anyone using more than a 15 tooth on the XR650R. I'm sure with a 15t front and smaller rear you can achieve the gear ratio you're looking for.

Sprocket Specialists has a 16T front sprocket for the 650R. I bought it and used it with my SM setup. Problem is no aftermarket 16T case savers. I made my own by copying an XR's Only 15T out of 1/4" aluminum and then belt sanding it out to fit. I suppose you could hack your stock saver or just not run one at all. There are no clearance issues at all outside of the case saver issue. Ride on.

Sprocket Specialists has a 16T front sprocket for the 650R. I bought it and used it with my SM setup. Problem is no aftermarket 16T case savers. I made my own by copying an XR's Only 15T out of 1/4" aluminum and then belt sanding it out to fit. I suppose you could hack your stock saver or just not run one at all. There are no clearance issues at all outside of the case saver issue. Ride on.

thanks! i'll check with sprocket specialist!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now