Sunline Foot Pegs Dont Fit ?? At Least Mine Dont

I Just Got A Set Of Sunline Foot Pegs 57mm Stainless And The Holes Dont Line Up On Either Side Any Feed Back Would Be Great Thanks

are you sure you received the correct pegs for your bike? If so, then you will just have to work with it...sometimes its a chore to get the springs slightly compressed to get the holes to line up.

See if they line up w/o the spring on them first...if they do, they fit.....some can be a real pain to get on.....

Should have bought fastways.

are you sure you received the correct pegs for your bike? If so, then you will just have to work with it...sometimes its a chore to get the springs slightly compressed to get the holes to line up.

Check the p/n first and verify with them that they are the correct ones for your bike. If they are, use a punch/screwdriver or the like from the bottom to line up the holes. Then slide the pin in as you pull the punch/scewdriver out. Install the washer and cotter pin and you're set. I usually put some waterproof grease on the pins as well.

well i tried again again again now this is crazy i can put the slidder bolt threw the peg back wards but the top whole is not linng up or am i doing something wrong its the same on both sides

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now