OK, So I've owned my xr650r for almost a month. I haven't really ridden it yet. Just to the shop, from the shop, to get it licenced and home. Anyway, I took the bike to the shop as soon as I bought it. I wasn't familiar with this bike or off road bikes so I thought I'd let a PRO do the job right the first time. I rode the bike there no problems. I picked the bike after 3 weeks or so and start it up in the shop. The bike is steaming and I smell coolant. The mech. says, that he topped up the coolant so it was the overflow. I, being the trusting type said ok. Anyway I rode the bike for around 15 Km and everytime I stoped it was steaming a bit and coolant mixure was dripping slowly on the ground. I did some searching on the net and asked around and was told that they do that sometime a bit. Hey, what do I know. Today I was washing the bike, took the left rad fairing off and started it up. (I forgot to mention that the previous owner did bend the rad a bit, but it never leaked!!) The bike ran for about 2-4 minutes and what did I see....coolant, seeping at the bottom of the rad. So what do I do now? I think the mechanic might have tried to tweak it into place and damadged. I brought it in and I didn't have this problem, now I do after leaving it there. Any advice? The shop is very close to my house and is the only one for miles around, so I don't want to get into a pissing match over this. He could just say that I did this after I left his shop, or make up some other bullshit story. I just commited myself to buying supermoto rims so I can't go and blow another $150. Is there someone that has a left rad piece? Or do you guys know, if there is someone online that repairs these things... Actually I sent my oil cooler to a place years ago but I don't remember what the place was called. It was something like Motorcycleradiatorrepair..... HELP!!