YZ400F suspension

My first question is when i bought the bike the previous owner said it might have enzo racing susp. but didnt know. how could i find out if it has OEM or enzo?

next question is how do i adjust the sag? i know this is probably somewhere in the forums but i am 150 lbs and 6' any riders out there that can tell me what your susp is adjusted to. i ride mostly trails and whoops very few big jumps. so if you guys could help me out that would be much appreciated.

Do the fork legs have Enzo stickers on them? If they do, then it's Enzo, if not, it's most likely stock.

As for sag, 100mm should be fine, anywhere from 95-105mm is about right...I run mine at around 97mm. You're weight, kinda light, so you may have to mess with the clickers, but you won't notice anything really since you're not riding track. So just leave it.

Do the fork legs have Enzo stickers on them? If they do, then it's Enzo, if not, it's most likely stock.

My china knock off pit bike has race-tech stickers on the forks, and its just crap china suspension. Sorry, had to say that. If it has the stickers, than it MOST LIKELY is enzo. I could be wrong, but I don't think you could tell for sure unless you knew what the stock internals look like, or if it feels set-up for the previous rider's weight.

the resevoir on the rear has an enzo sticker and the front forks did have them. but could you just buy those stickers? anyway sag is in the back right? my service manual doesnt tell me how to adjust the sag? so how do i adjust it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now