Precision Concepts Suspension- -worth it?

Can anyone vouch for Precision Concepts on a 650R? I realize that it's what the Honda off road team runs, but how about in a non-race application? I run mostly open desert, fire roads, and baja. Would like a smoother feel through the whoops and chop. I like to hit the sand whoops at a fast pace. I've heard from a friend that the difference is like night and day. True?

Thx

everybody who runs it swears by it but I would too if I spent that kinda dough!

I had the full Monte from PC......revalve, springs for my weight and foot peg fix....and I am very pleased. The spring rate change was substantial, so I felt that a revalve was required. An intangible deciding factor was their involvement with the Team Honda bikes...... are there a lot of other shops specializing in right-side-up forks?

Can anyone vouch for Precision Concepts on a 650R? I realize that it's what the Honda off road team runs, but how about in a non-race application? I run mostly open desert, fire roads, and baja. Would like a smoother feel through the whoops and chop. I like to hit the sand whoops at a fast pace. I've heard from a friend that the difference is like night and day. True?

Thx

Ask any of my riding buddies I have passed a hundred times over the rough stuff like they were standing still if it works. If you are a real 650 rider you cannot do without it. I guarantee you will be able to ride so much faster you won't know how you rode without it. I trust you have already installed a Scott's stabilizer. The best costs money, just get over it.

Oh yeah, in answer to your question........TRUE!

I had my suspension done by Rob Barnum.

It is good, but I still need to work on it getting the clickers dialed.

Long story short, there are other options then Precision Concepts.

Ask any of my riding buddies I have passed a hundred times over the rough stuff like they were standing still if it works. If you are a real 650 rider you cannot do without it. I guarantee you will be able to ride so much faster you won't know how you rode without it.

A pretty good endorsement. I just want me to be the thing that slows me down in the rough and not the bike. Cost is actually fairly reasonable comparatively and PC is local.

Thanks

I have a full revalve and springs from PC. I've ridden several different 650R setups from the other SoCal suspension shops and still will go with PC all over again when I get my new 650R this fall.

XR650R--precision is the best. :thumbsup:

I've had 1 bike done by Race Tech and 1 by PC, PC is way better for the $. Plus your dealing with people that know the bike better. I took the other bike back to RT 3 X's and it still wasn't right, I finally gave up on them.

everybody who runs it swears by it but I would too if I spent that kinda dough!

I looked at their website, it didnt look that expensive to me, am I missing something? $150.00 per set of forks and 150 for the shock? Thats about the same as racetech or Noleen....Im hainvg my forks and shock done by Noleen only because they built them for the guy who owned the bike and have their stuff inside them but on my supermoto the racetech stuff needs to be redone too. Should I go PC instead on the supermoto?

No question about it, one of the best mod's you can do to your XR. Never had any problems with performance or support. Bob Bell know's his stuff. :thumbsup::ride:

i already have gold valves in my pig, will PC work with that or have me purchase there's?

Sure they'll work with you regardless what you already have in there. Ya might save a few bucks too.

Precision Concepts :thumbsup:

I looked at their website, it didnt look that expensive to me, am I missing something? $150.00 per set of forks and 150 for the shock? Thats about the same as racetech or Noleen....Im hainvg my forks and shock done by Noleen only because they built them for the guy who owned the bike and have their stuff inside them but on my supermoto the racetech stuff needs to be redone too. Should I go PC instead on the supermoto?

$700 is what I hear for a revalve and springs...

They prefer tp receive your stuff bone stock so keep that in mind.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now