Here are a few pics of my L with CRF front and rear fenders. http://i24.photobucket.com/albums/c20/Fourstoked/IMG_1750.jpg http://i24.photobucket.com/albums/c20/Fourstoked/IMG_1757.jpg http://i24.photobucket.com/albums/c20/Fourstoked/IMG_1754.jpg http://i24.photobucket.com/albums/c20/Fourstoked/1f5119ce.jpg http://i24.photobucket.com/albums/c20/Fourstoked/IMG_1753.jpg Putting on the front was easy, just space down the fender enough to for wire clearance. The back fender was aggravating. I had to cut down the fender (2005 CRF 450). I also tapped the back side of the sub frame to bolt from the under side. Up under the seat I ran bolts from the bottom up rather than from top down on the original fender. I also had to fab a bracket after the first decent air I got on my first rear fender attempt ended in plastic carnage. It was ugly. I have not had any problems thus far this time with a little ride time so I thought I would post some pics before I break something again.