is this a vent line?

theirs 2 hoses on top of the z426 motor. ones the oil line and whats the other one? just a vent?

if its a vent does it blow hot air out? cause i was thinking of putting it in the intake hose cause i have a spot i could fit it. but if it blows hot air then im not gona do that.

One is the oil breather hose, the other is the spark plug?

You blew that. We were trying to ignore him.

The big one's the breather, the little one is the pressure balance vent for the oil tank.

What's your BAL today, gd?

That is the way it is on mine, one the oil blowoff and other sparkplug.

I have had oil come out of that blowoff hose when the bike was new and I did not lay it over eather. I have not seen it since then though. Hope that is normal.

That is the way it is on mine, one the oil blowoff and other sparkplug.
Yours is an '06. The pressure balance line was moved off of the cam cover. '05 and earlier had two HOSES coming from the cam box.
That is the way it is on mine, one the oil blowoff and other sparkplug.

I have had oil come out of that blowoff hose when the bike was new and I did not lay it over eather. I have not seen it since then though. Hope that is normal.

Just was some overfill from whoever preped your bike.

Yeah, mine is an 06

so i shouldnt hook that line up to my intake?

so i shouldnt hook that line up to my intake?

GD, some will route the breather tube to the airbox if this is what you are trying to convey?

I would only do it if you ride in deep water alot(water can be sucked into the motor) or have a problem in sand dunes sucking sand up your pipe....into your motor.

Do not use it for a beer funnel.......not good :excuseme:

GD, some will route the breather tube to the airbox if this is what you are trying to convey?

I would only do it if you ride in deep water alot(water can be sucked into the motor) or have a problem in sand dunes sucking sand up your pipe....into your motor.

Do not use it for a beer funnel.......not good :excuseme:

well when i had the 400ex motor in the frame the motor had a crank case breather tube that went from the motor to the air intake boot. im still using that air boot for the yz motor thats in the frame. i need to hook that tube from the motor up to the intake boot to fill in the hole or somthing. if i dont then ill suck dirt.

so is it safe or is oil gona come out?

well when i had the 400ex motor in the frame the motor had a crank case breather tube that went from the motor to the air intake boot. im still using that air boot for the yz motor thats in the frame. i need to hook that tube from the motor up to the intake boot to fill in the hole or somthing. if i dont then ill suck dirt.

so is it safe or is oil gona come out?

The oil is going to mist out.

just plug the hole on the boot and run the line into the airbox :excuseme:

just plug the hole on the boot and run the line into the airbox :excuseme:

i run no air box. how should i plug up the hole? :bonk:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now