Sign in to follow this  
Followers 0
Taffy

My 01 WR - Colorado Jetting

6 posts in this topic

what pipe?

very low needle and jet so you must be corked up!

what is the PAJ#100? if so get the PAS and a 160MAJ, 40,38,35PJ and go do some testing. there's more to come.

Taffy

Share this post


Link to post
Share on other sites
Originally posted by Taffy:

what pipe?

very low needle and jet so you must be corked up!

what is the PAJ#100? if so get the PAS and a 160MAJ, 40,38,35PJ and go do some testing. there's more to come.

Taffy

As I said, Stock header and Uncorked Stock Can(That's what some of us call Silencers). If I'm not mistaken stock is PAJ#200. I'm stock.

Airbox lid off. No BK. No grey wire. Although I might try the grey wire. I think it could have a bit more in the mids.

Share this post


Link to post
Share on other sites

in that case you can take my settings and dump them straight in.

only joking!

but seriously, work toward the figures i've got and it'll get better. cure each problem as you go before moving on.

std MAJ is a #200

std PAJ is a #100

it's 11.30pm here and i'm knackered so i'm sorry i missed the glaringly obvious wr426 '01 and the bit about the pipe.

keep it going

Taffy

Share this post


Link to post
Share on other sites

That's OK UK dude. Thanks for the advice. Right! PAJ#100 and MAJ#200. :)

I'll give those suggestions some thought.

I would change my username if they would let me. I might have to create a new acount as not to mislead. :D

Share this post


Link to post
Share on other sites

Almost forgot about the throttle stop cut down to 18mm. But that was so..........long.........ago. In a land far, far, away.

Share this post


Link to post
Share on other sites

I just thought this would be of interest to people in the Denver/Colorado/5000-7500 elevation areas.

Needle: EJP#3

Main Jet: 152

Pilot:42

Airbox lid off

Stock header and Uncorked Can

Hick has told me all along to change the needle to a E__ type needle.

I rode approximately 150 miles over the weekend. 50-60 miles at Watkins(5200ft) and 90-100 at Rampart(6500-8500ft). Ran great the whole time. Sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet! I hope I didn't just jinx myself.

So thrilled.

Hope it runs good at 4k > with Hick around Thanksgiving.

Anyway, thought this was worth mentioning for those at higher elevation.

Remember: I have no BK mod or any diaphragm change at all and no greywire mod.

Who out there likes the new layout of the Watkins track in comparison to the old? Just wondering.

[ November 05, 2001: Message edited by: XR4hun ]

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0