Anyone have a WR400?

If you have a WR400 can you shoot me a PM I'd really appreciate it if you could take a simple measurement for me on the fronnt fork. I'd like to know the distance from the top of the front shock to the top of the axle hole.

Thanks in advance!

Measure with the front fork compressed slightly by the bikes weight or setting on a stand with the front tire in the air?

Measure with the front fork compressed slightly by the bikes weight or setting on a stand with the front tire in the air?

On a stand please, I need to know the overall lenth. if you can measure the diameter of the axle whole too that would be AWESOME!

Thank you VERY much for doing this!

May not be able to get back with you until tomorrow morning but I will do my best.

I have one but it's at a friends house right now. I should be picking it up tonight and if you don't have an answer by then I'll measure mine.

There is no rush on this, I am curious about the length to see if it will affect the geometry of my steering angle. I'm researching replacinging my stock KLX forks with the nicer Kayaba's you guys have :excuseme: Thy're same diameter and the overal length and the length from the axle eyelet is the issue at this point, also the axle eylete diameter :bonk:

I'd like to NOT totally modify the front end if I can help it. just the showcks would be nice :busted:

Sorry no go for me tonight. My buddy decided to go to the track after work and wasn't home for me to pick up my ride. If you don't have anything in the next day or so I will get you some figures.

'99 400

From top to top of the axle: 93.3 cm

axle 1.4 or 1.5 cm

Thanks everyone.

Now you have to tell us if your bastardation project works!!

I have the entire front end (forks, triple clamps, wheel, brake assembly) off a Cannondale I was going to install on my WRF.

Buying my 06 CRF has pretty much ended a desire to ride my WR. Pennsylvania, not allowing me to (re) register my NH LEGAL WR has not helped.

I was tossing whether to sell the OHLINS or install the OHLINS and sell the Factory Connection revalved KYB's & wheel assembly...???

The OHLINS are quite mechanically cool internally! :excuseme:

Now you have to tell us if your bastardation project works!!

When I get the money and the time I certainly will, I'll take photo's and more :excuseme:

Again thanks to everyone who's helped out!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now