WR Plastic Question?????

Well I'm getting ready to order up some graphics for my o6' WR and I need some clarification. I have a YZ rear fender and If I want the graphic to fit that fender I have to order an 03-05' YZ kit. I can get the WR tank and shroud separately but I have to order the YZ kit with all the other pieces. I just want to make sure that the WR and YZ have the same front fender, fork guards, etc.... Anyone know?

Thanks

Different fork guard part number's.

I believe the only difference on the fork guard is the YZ does not have the clip for the odo cable but they may also have different bolt slots.

The front fenders are the same on the 05

What other plastic were you looking at getting?

I am ordering a graphics kit for it and they weren't sure which ones to give me for the fenders and fork guards. Thanks for the info.

I was wondering, if I wanted to could i switch out the back fender that has a light for a fender that doesnt have a light?

I believe so. You can get the 05 yz rear fender and with a few modifications

it should fit just fine. I think you need to cut some holes for the

reservoir mounts. :excuseme:

I was wondering, if I wanted to could i switch out the back fender that has a light for a fender that doesnt have a light?

yeah you can- mine is an 04' wr 450. I used an '04 yz 450 rear fender- worked liek a charm. all i had to do was cut some holes in the new fender to make room for the radiators hoses and such.

Just finished changing my '06 WR450 to black plastics. I used YZ UFO plastics from an '05. The rear fender needed a little modification but the fender had markings. Front straight on. The side covers fitted straight on with no mods. The left fork guard straight fit while the right one needed mods to suit the odometer cable. I drilled 3 sets of 2 small holes & cable (Zip) tied the odo cable inside the fork guard. I found that the radiator shrouds are the same on WR as the YZ but because I changed to black I wasn't worried. I used a Clarke black tank with the YZ shrouds. Also watch out re: seats, Clarke told me I needed a YZ seat for their tank which I bought but the YZ seat doesn't fit an '06 WR450 as the battery gets in the way. Hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now