xr650l rear fender (crf450r) pics

So…

i put a 450 rear fender / Baja designs LED / & homemade turn signal bracket on my 06 L. Hope the pics come out….

Picture033.jpg

Picture030.jpg

Picture043.jpg

Picture039.jpg

looks really good man, I was wondering if tht would be nice. Now I know and will do that but in black. looks awsome :thumbsup:

thanks bro, here's a couple more shots...some better angles

Picture004.jpg

Picture012.jpg

Nice bike and fender ya got there.

What year was the crf450 fender from?

Looks good!

Way better than that stock droopy one.

I like it. :thumbsup:

do those leds light up red, and how do they work with your stock wiring as far as the draw on your batt. thanks

Yeah, the LED’s in the light are red…tail and brake. It’s a super simple hook up to the original wiring. 3 wires into 3 wires. And its less draw…a lot less!

I believe the fender is off an 00 to 04. Just don’t get the “flo red” color – it looks more pink than red. This particular fender is a UFO, color – RED. As you can see, it’s pretty close to the red of the original (front) fender.

It’s actually a pretty easy job…sold the original 06 fender and light for about $80 on e-bay. Bought the LED, fender, blinkers, stainless hardware and steel for about $115-120 …took my time, cut the fender down to fit, fabbed up a signal mount, made some tabs for the sides, wired and bolted it all together. I would recommend buying JUST the light from Baja Designs, and making your own bracket. The plastic (under the fender) thing they sold me was ok, but I ended up cutting it all to hell anyways. I thought I needed it, but the light can be mounted on anything. An aluminum mount would be much better

I believe the fender is off an 00 to 04.

Bought the LED, fender, blinkers, stainless hardware and steel for about $115-120 …took my time, cut the fender down to fit, fabbed up a signal mount, made some tabs for the sides, wired and bolted it all together.

D4S,

Thanks for the info. I purchased a crf450 fender off ebay to play with, but it looked so different I never tried to hack it down to make it fit. Could you shed a little light (or a pic maybe :thumbsup: ) on your install, cause it sure turned out great on yours. :thumbsup: .

Looks Nice!

Nice job there desert4seat! Looks cool let us know how it lasts. What kind of crazy exhaust can is that, is it loud, looks lower than stock? Or is it because your fender is way higher than stock.

thanks bro, here's a couple more shots...some better angles

Picture004.jpg

Picture012.jpg

What kind of pipe is that?

Is there any bracing to hold up the assembly? I've heard that that type of setup typically flops around a good bit in the dirt, even heard of the rear tire taking one out.

That looks sweet! How is the fender & light on rough terrain? Any signs of stress? Does it bounce around at all? Looks pretty sturdy to me from the pics. Great job man!

Bill

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now