Oil change help !!

I just got a 2003 WR450, did oil change today but have questions. After changing filter and checking screen in front below radiators making sure it was clean as per owners manual - I installed new oil, measured correct amount per owners manual. After I started bike for a couple minutes , I pulled dip stick and oil started coming out? What is going on? :thumbsup:

I installed new oil, measured correct amount per owners manual.

on the dipstick or by the quart?

Turn off the engine when you check the oil.

Jerry

sounds like you put too much in if bike was not running when you checked it.

when i picked up my new suzuki 400 from the dealer i checked it and they had the crankcase and the resivour full. check the level while it is hot but not on

After you start your bike, turn it off and let your bike sit for a 3-5 minutes before you check the oil level.

Sounds like you didnt drain out all the oil, or put in more oil than the specs tells you to..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now