LED Tail/Brake Light Install

I recently bought an LED tail/brake light along with a hydraulic pressure switch from http://www.wheelingcyclesupply.com/index.shtml

The setup is clean and everything fits inside the existing lens.

I purchased Part Number D45-DTL-9110. It bolts right in where the existing rubber fingers hang down off the stock bulb setup.

Here's the pictures from the LED install.

LED Installed without Cover.

http://img.photobucket.com/albums/v218/sjriott/XR650R/Rear.jpg

LED with Running Light

http://img.photobucket.com/albums/v218/sjriott/XR650R/Running.jpg

LED with Brake Light.

http://img.photobucket.com/albums/v218/sjriott/XR650R/brake.jpg

Wiring was simple.

Black on the LED to Green on the XR650R

Yellow on the LED to Brown on the XR650R

Red on the LED to the Hydraulic Brake switch

Other lead from the Hydraulic Brake Switch to Brown on the XR650R

Good info, thanks.

I can't find the part number you are listing. It shows a model for-

1-KLX/TTR

2-'03 XR250

3-Lucas

4-UFO/Acerbis

Didn't see it elsewhere.

I'm sure it's the part for the 03' XR250.

Call and ask for Forrest.

I too had some trouble finding the part. I think I narrowed it down to these four?

I am very interested in doing this since I broke my baja designs.

Tail Light Mfg by: DRC Hardware Top

Phantom

* 8 high-intensity LEDs

* tail light base made from flex rubber, enabling a great fit on all shapes of rear fenders

* works on 12V AC/DC

Flex

* flex fit shell and body with 16 high-quality chip LEDs

* fits curved surfaces

* works on 12V AC/DC

* high impact, water and shock resistant

* dimensions: L106mm x W19mm x H7.5mm

CRFX

* fits CRF250X/450X

* smaller and lighter than stock LED light

* 8 high-intensity LEDs

* long operating life

* reduces electrical consumption

* high-impact, waterproof and shock resistant

* available in red or smoke lens

* works on 12V AC/DC

Edge-2

* 16 high-intensity LEDs plus 3 white LEDs for illuminating the license plate

* reduces electric power consumption for longer operating life

* waterproof circuit

* detachable lens

* available in red or smoke lens

* works on 12V AC/DC

Just got off the phone with Forrest, good guy!

Part # D45-19-011

$18.95 plus shipping.

I should get mine by Thursday or Friday.

Woo Hoo :thumbsup:

Sorry, I should have clarified. It's the "Inner Kit" that you need to be looking for.

It is just a 12 LED Assy that fits inside the lens. It comes with the bracket, connectors and hardware to mount inside the existing lens.

Thanks to everyone that has taken interest in the Moto LED Tail Light Inner Kit !!

The D45-19-011 does fit the XR650,and the Super XR 250/Baja-02 TT-R250,DT230,KDX220SR, and the KLX250.

I will have a pic of the license plate light soon, have them,just no pic yet.

Fg

Which oil pressure switch do you use?

M10-1.25

or

m10-1.00

M10-1.25 was the one I ordered.

Holy crud....for those two SMALL items, they want $17.76 to ship them! That's ridiculous! I had the order form all filled out and everything.....

Holy crud....for those two SMALL items, they want $17.76 to ship them! That's ridiculous! I had the order form all filled out and everything.....

motochris,

I ordered mine earlier today, and a little while later Forrest called to explain that the shipping quote was incorrect, probably due to an incorrect weight being used by the automatic shipping calculator. He said it would be somewhere around $5 (can't remember the exact amount) to ship the LED tail/brake light to San Diego.

That makes more sense...I'll just call them. Thanks.

I was charged $4.50 shipping.

If shipping was as much as the parts, I NEVER would have posted this. The whole setup was cheap, quick to install and just what I wanted. Plus, they were very helpful.

I called and spoke with Forrest directly. They hope to have the shipping calculator fixed in a day or so. He said shipping would be less than $5 to me, so I ordered the parts. Thanks for the heads up, they seem like good guys.

Wow ! Way cool ! Do you guys think it will fit a XR600R? Is the lens the same in the 650 ?

Wow ! Way cool ! Do you guys think it will fit a XR600R? Is the lens the same in the 650 ?

Don't know. He said he'd send me one to try out so I'm sure I could have returned it. This part is for the XR250R so they should be close.

Don't know. He said he'd send me one to try out so I'm sure I could have returned it. This part is for the XR250R so they should be close.

What are you installing it on? The 2001 650 R ?

What are you installing it on? The 2001 650 R ?

Yes, 2001 XR650R.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now