Aluminum Throttle Tubes

[DrThumper]

Hey guys, I need a new throttle tube. I would like to get an aluminum one, but I use handguards. Who makes a good aluminum throttle tube with an open end (or an aluminum throttle tube with a closed end that you know I can cut-off w/o messing up the tube and/or bearing...if it has one).

BTW-Its for my '00 426, if it matters... ?

[crfdaddy]

i believe pro taper makes a open end throttle tube with a bearing in it. i have a pro taper with the bearings in it but it is a closed end. i am very happy with mine as i plan on pulling it off along with some other after market stuff i put on the 04 450 and sell it, probably going to a 250f

[Ga426owner]

If you are going to cut the ends for handguards buy the cheapest one you can find sunstar..... ? Do not get one with the bearings unless you give up the handguards or just use roost protectors

[ridesblue]

i got one from performance engineering and it has an end that you can punch out for hand guards

[DrThumper]

Thanks Guys!

[gjones]

Moose Racing makes an open ended aluminum throttle tube.

You will have to order through Parts Unlimited.