wr426 problem with stalling

So I just got my bike going after a long winter in hibernation. I changed the plug, put in fresh gas, cleaned the air filter and changed the oil. The bike starts and runs great but when I pull in the clutch and let off the gas after riding it the engine stalls. I've searched the forum as best I could and saw that one person had a similar problem and found it was the brake light switch causing it. Any idea what else could be causing this problem?

Thanks for your help.

Idle set too low will cause this, but you probably already thought of that.

Josh

Idle set too low will cause this, but you probably already thought of that.

Josh

I had thought of that but I haven't tried adjusting it yet. For some reason I thought it would be a bigger deal than that because nothing had changed from last year. Who knows though, I may have bumped it when I drained the gas or took the tank off. Thanks.

No problem, just to note though, I have to adjust mine almost every ride. My idle changes quite a bit with temp changes and it always idles higher when the engine is cold.

Josh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now