hesitation on accell

I agree, but not one person has asked for your jetting specs. I think you should tear into your carb, for a good cleaning at least, and figure out which jets you are running. Post your specs and I'm sure someone can make a much more well informed recommendation.

Being the TPS didn't solve the problem this is the best advise yet. Hook the TPS back up and let us know what jets, needle position, altitude etc.

Don't hook the grey wire back up, unless you put the stock WR throttle stop in :thumbsup:

Being the TPS didn't solve the problem this is the best advise yet. Hook the TPS back up and let us know what jets, needle position, altitude etc.

Hmmmm, it is never TPS! :thumbsup:

Don't hook the grey wire back up, unless you put the stock WR throttle stop in :thumbsup:

Yep, do a search and check the retardation in the ignition curve above about half (WR stop) throttle

THEN, you'll convince yourself that the Gray wire goes and the YZ stop stays... :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now