Jump to content

2003 yz450f oil level question


Recommended Posts

On my 450 when i went to change the oil the manual says to put in 2.7 quarts of oil i believe and so i think i got close to it when it came down to it. So yesterday when i went and fired it up and let it idle for the 3 minute time the manual says to iit shows it was way over the full lever. I know i was very close when i filled it because i went slowly and measured out the container to show where i need to stop. And yes im sure i got all the oil out of the crank and the frame. But what my question is will this have done damage to the bike? ?? ........i am taking some out till i get it right tonite

Link to comment
Share on other sites

this comes from my 2005 service manual

i cut and pasted it from my PDF file, page 38

Oil capacity:

Engine oil

Periodic oil change 1.0 L (0.88 Imp qt, 1.06 US qt)

With oil filter replacement 1.1 L (0.97 Imp qt, 1.16 US qt)

Total amount 1.2 L (1.06 Imp qt, 1.27 US qt)

Link to comment
Share on other sites

this comes from my 2005 service manual

i cut and pasted it from my PDF file, page 38

Oil capacity:

Engine oil

Periodic oil change 1.0 L (0.88 Imp qt, 1.06 US qt)

With oil filter replacement 1.1 L (0.97 Imp qt, 1.16 US qt)

Total amount 1.2 L (1.06 Imp qt, 1.27 US qt)

This is what my manual says as well. The dip stick validates these amounts.

?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...