Sign in to follow this  
Followers 0
RIDER307G

04 Wr450 Questions

2 posts in this topic

Just bought it and it has all free mods, but I didn't do them. The airbox right now has a snorkel type of inlet on the top with a piece that runs across the top to divide the one large opening into two. Do I remove this? It also has the holes cut in the sides.

Also, the clutch lever and perch has a wire and switch in it. What does it do and what happens if I replace the perch with an aftermarket one that does not accomodate this?

Thanks for the help.

P.S. what is the distance that can be done on the stock tank?

Share this post


Link to post
Share on other sites
Just bought it and it has all free mods

MAKE SURE!!!!!!!

The airbox right now has a snorkel type of inlet on the top with a piece that runs across the top to divide the one large opening into two. Do I remove this??

take it out!!!

Also, the clutch lever and perch has a wire and switch in it.

you dont need that!!! it is a clutch safety switch and will brake on you eventually any way. cut the wires where they come out of the plug under your headlight. strip them , twist them together, and put shrink wrap over it.

what is the distance that can be done on the stock tank?

110-150km on all 10L.

rememberer to have fun and change your oil ever 200-500km!!!!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0