Front Forks? 03 L

I want some more meat up front. I like the 48 mm inverted on my buddies KTM. Can it be done on the BRP. Where can I get them? I've gone somewhat mod crazy.....BECAUSE OF ALL YOU GUYS!!

Check out Emig Racing .com He may have a triple clamp for you. After that I would just use the whole front end off the KTM. May have to switch Brake Master cylinder?

Hayden

I want some more meat up front. I like the 48 mm inverted on my buddies KTM. Can it be done on the BRP. Where can I get them? I've gone somewhat mod crazy.....BECAUSE OF ALL YOU GUYS!!

Yes, several people already have. It can even be done to the XR650L. I adapted the XR steering stem to fit a pair of CRF triples.

http://www.thumpertalk.com/forum/garage.php?do=viewattachment&attachmentid=13913

MGS

hi guys i new to this talk so just need all e help from all of you i would like to know how can i convert using usd fork for my 650r and how much will it going to cost?

MG nice bike,wich tank is that?Does it comes with the shrouds? :thumbsup:

It's an ALOOP tank-seat-shouds combo. Around $500. Search Aloop.

edit ooops :thumbsup:

Forks are 45mm Marzoochi that fit CRF450 triples. Custom spacers are needed to fit the XR steering stem into the CRF triples. Front hub is a CR250. Forks and triples were from ebay. I had my front wheel relaced with the new hub by ECW.

Wait till you see the next XR650L I am building this summer. 50mm forks and a 180 rear tire with dual exhaust.

MGS

Got the page but I saw no mention of an xr650l combo.Also what capacity is the tank (gals.)?Thanks anyway.

Wait till you see the next XR650L I am building this summer. 50mm forks and a 180 rear tire with dual exhaust.

MGS

Swhiiing

Can't wait to see this one. :thumbsup:

Got the page but I saw no mention of an xr650l combo.Also what capacity is the tank (gals.)?Thanks anyway.

Tank was designed for the XR600R, requires mods (welding fab) to fit the XRL. Tank holds 2 gallons. I fill up on the way to and from work, a gallon at a time. I am a slave to fashion.

MGS

So if I had a front end from like an 89 CR250 It should bolt up to the XR650L, but you'd have to have a wheel/hub from the CR as well??

Great thread guys! We should try to gather the info for this mod for everyone. My friend is a machinist and bought YZ250 USD forks off ebay for his KLR 650, but ran out of time this winter to finish. I'd like to put some beefy forks on my 02 XRL - Any suggestions???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now