Finally got my 06 ready to ride...

[Ga426owner]

I have had mine for 2 weeks now ... It has not seen dirt yet...I just completed it! ?

I disassembled it - reassembled to spec

Every bolt/fastner is torqued

All linkage, every axle, every bearing all lubed like it should have been....these things are dry, with a lite film of grease from the factory...pathetic.

Graphics are applied - DecalWorks

Litespeed pegs, Ironman/DID ERT, Zipty fuel screw, rejetted, Sen Dec, MS3 Starcross all installed and ready to break it in......and the weather sux ?

[NYMXer]

Now that you have experiance, I'll be right over with mine. Don't worry, I'll help too......someone has to hold the worklight! LOL

[mtrdrms]

lets see some pics!

[cowboyona426]

Agreed, pics would be good!

[Ga426owner]

I have had mine for 2 weeks now ... It has not seen dirt yet...I just completed it! ?

I disassembled it - reassembled to spec

Every bolt/fastner is torqued

All linkage, every axle, every bearing all lubed like it should have been....these things are dry, with a lite film of grease from the factory...pathetic.

Graphics are applied - DecalWorks

Litespeed pegs, Ironman/DID ERT, Zipty fuel screw, rejetted, Sen Dec, MS3 Starcross all installed and ready to break it in......and the weather sux ?

Here are some pics of the "virgin":

[yz_for_me]

Nice! Lookin very good. Now you just need some dirt on it. ?

[Ga426owner]

Nice! Lookin very good. Now you just need some dirt on it. ?

Thanks....problem is it is 36 degrees outside....15-20mph wind....... ?

[FFRacing79]

Thanks....problem is it is 36 degrees outside....15-20mph wind....... ?

You wuss!!! j/k Tdub

[yz_for_me]

Thanks....problem is it is 36 degrees outside....15-20mph wind....... ?

That sucks. I know the feeling. Ironically, I have nearly identical conditions here today. Currently 39 degrees with 18 mph winds. ?

[Ga426owner]

You wuss!!! j/k Tdub

yea so what...........45 is my limit..... ?