HEADS UP!!!

Site upgrade in progress... Core site functions are working, but some non-critical features/functions will be temporarily unavailable while we work to restore them over the next couple of weeks.

Please post any bugs you encounter, but before you do, check to see if it's already listed.

Thanks for your patience while we work to improve the community.

Sign in to follow this  
Followers 0
steve lemley

Where is this damn grey wire at?

12 posts in this topic

I want to cut the grey wire and have the bike torn apart. I cant find a grey wire anywhere. The only one I see comes out of the CDI and down the right side of the frame and right befroe the carb branches out of the main loom and starts its own loom with a black wire. This is short and comes to its own plug for disconnecting. Is this it? Where is this bad boy, does it go to the CDI or the stator??? Thanks...

Share this post


Link to post
Share on other sites

IF YOUR BIKE IS A 05 OR NEWER TAKE OFF THE SEAT & TANK ,AT THE TOP OF THE FRAME THERE SHOULD BE A SIX WIRE PLUG THE GREY WIRE IS IN THIS PLUG . BE SURE TO CUT SO THERE IS A LITTLE EXTRA ON EACH END AND TAPE THE ENDS REALY WELL. DON'T PULL THE WIRE OUT BECAUSE IT KEEPS THE OTHER WIRES FROM GETTING WET. :applause:

Share this post


Link to post
Share on other sites

Here is some LARGE pics of the mod on my 06 WR450 - I filled the hole with silicone..

GrayWire1.jpg

DSC00023.jpg

DSC00024.jpg

Share this post


Link to post
Share on other sites
Here is some LARGE pics of the mod on my 06 WR450 - I filled the hole with silicone..

GrayWire1.jpg

DSC00023.jpg

DSC00024.jpg

Great pics Fozz! Wish I had those when I pulled my grey wire.

Share this post


Link to post
Share on other sites

My 99 wr had a grey wire......... But it was so long ago I can't remember where it was except on the right side of the frame under the gas tank. A six pin conector ,I think......

Jim

Share this post


Link to post
Share on other sites

I found it. Its actully on the right side of the tank but its not in the 6 pin plug. Its in the two pin plug right under the 6 pin out coming out of the CDI. Solid grey and solid black wires.

Share this post


Link to post
Share on other sites

As I understand it all USA WRs have the grey wire. My 98 WR had the grey wire in the two pin connector. I pushed the pin out of the connector, folded it back and taped the wire and connector to protect it from water.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0