'06 bar risers

[Jasons]

Does anyone know where to get bar risers that will fit the stock 06 clamps?

I want to go up about 15mm and forward 5mm if possible. I am considering trying to space the stock clamps up but that would not allow me to move it forward.

Thanks,

Jason

[DPW]

Does anyone know where to get bar risers that will fit the stock 06 clamps?

http://brpit.com/ call them...$65 or so

[Jasons]

Thanks guys.

BigDR,

Those risers look nice, the 06's have removable mounts so I will probably go with one piece mounts like the BRP or space my stock mounts up. I would rather minimize the number of pieces involved. They look like they would work very well on a fixed mount clamp.

Thanks again,

Jason

[aford541]

I was thinking that I would take some 1.5 inch aluminum stock, cut some 5 mm thick washers, buy a longer bolt and let her ride.

[Jasons]

That is what I am going to try first. Let me know how it works if you get to it soon.

Jason

[Trick WR]

I have done a lot of buisness with BRP, they are excellent! Also, a lot of guys that work there are tall, several of them are over 6 foot. They were a big help in getting me set up with the right triple clamp/riser/bar set up for my frame (6'2). I would use them if at all possible. Great Guys!