Wr To Yz Conversion Brackets On Ebay

Look what I just seen on ebay. Has anybody tried these ?

I tried to make a link but no luck. Just go to ebay and type in the search box

( yamaha wr to yz ) you will see what i am talking about.

damn..to bad not for '03 but i am sure could be made to fit. i had fun changing 03 wr to yz number plate...cut the plate, remover speedo, remove ignition, drill holes...ahh the life a back yard mechanic

That's funny...

it looks home made to me.

If you ever have the headlight busted out of your WR you will wish you had this in it's place. A headlight lens is $119.00 and you don't need it during the daytime riding and thats when mine was smashed. If I had my brackets before my headlight was busted out I would be about $85.00 ahead of the game now. I guess better late than never.

This only cost me about $10 and a little time:

http://www.thumpertalk.com/forum/garage.php?do=viewattachment&attachmentid=3520

WOW you got cornholed $10.00 for some velcro and plastic. Hmmm mine that I made cost me 45 cents and the hardware store even cut it to size and shape.

By the way how does the velcro hold when the heat from the headlight softens the glue?

WOW you got cornholed $10.00 for some velcro and plastic. Hmmm mine that I made cost me 45 cents and the hardware store even cut it to size and shape.

It was an 8x10 sheet. I made one for my buddy too.

It probably wasn't $10.

By the way how does the velcro hold when the heat from the headlight softens the glue?

400 miles on it and I have an '05 with no light switch. I got the idea from a similar piece mounted to a sportbike.

Unfortunately the rock that hit my headlight was the size of a baseball and comming at me at about 60mph and I was going 60 mph toward it. I seen it comming toward me and the next thing I knew I seen it going away from me so impact had to be at about 120mph and the size of a baseball. I stood up on the pegs looked over the bars and no lens at all ...not just a crack no glass at all.

Dammit... see how you are.

Now you're gonna make me go out and weld one up from 3/16 expanded stainless :)

Make one for me too. I use my bike as the test bike :)

I used a steel mesh... It's tough to take a pic of it when mounted though.

lightguard-1.bmp

I swap to a nb plate when I go to the track though. Only use the head light on road and trails...

Math looks like 1/4 inch galvinized eve mesh.

So, does anybody want to sell me their used headlight lens? Put new tires on my buddy's KTM 625 SXC and he roosted me and broke mine. Thanx Jeremy.. :D Now i'll make a guard... but just a little late. '04 wr450 :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now