header tape? yay,or nay ?? i've seen some people using it with the newer bikes. and the reasoning behind it is to accelerate the exhaust through the pipe(which is fact) well the new pipes are so thin i was kinda wonderin' if they would survive?, one feller' stated he's been running it on his wr for a year+ in the desert with no prob... i'm thinkin' it may even cut down on heat cycle stress. i run the stainless powerbomb,so i think it might be all right as far as the metal goes. another thing is the p-bomb works on the principle that the exhaust cools in the "bomb" and then ramps back up on exit for more flow. what might wrapping do for that? i want to wrap the whole header as i got a pretty nasty burn from it last year. i tried the carbon fiber gaurd specifically for the power bomb but it ripped off the first time i dumped on that side. one other reason is that the radiator is only 1/2" away from the header. frostbite just did a in depth article with infrared scanning and found this to be the cause of his over heating.... pro's vs. cons ???